SP-type Inter-Connector consists of alternate layers of conductive and insulating rubber and of soft rubber insulators fitted on both sides. Since SP type has lower resistance than SS/SG, it is particularly ideal for display with tall height, such as LCD with backlight.

Outline Dimensions

Dimensions and Tolerances

Item	Unit	0.05P Type	0.10P Type
Pitch (P)	mm	0.05±0.03	0.10±0.04
Length (L)	mm	2.0~20.0±0.15, 20.1~90.0±0.65%, 90.1~150.0±0.6, 150.1~200.0±0.8, 200.1~275.0±1.0
Height (H)*	mm	1.0~5.0±0.1, 5.1~20.0+0.15/-0.1
Width (W)	mm	1.2~2.3±0.1, 2.4~4.5±0.15
Width of Conductive   Layer (Z)	mm	0.3±0.05(standard), 0.6±0.05(secondary standard)

* HW/2
SS-N type, which has non-sticky sides is available on request.
Shin-Etsu Inter-Connector has been registered in European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.

Basic Properties

Item	Component	Unit	0.05 P Type	0.10 P Type
Specific Gravity	Insulator Conductor Edge insulation part		1.15 1.15 1.05	1.15 1.15 1.05
Shore Hardness A	Insulator Conductor Edge insulation part	ISO7619 (TYPE A)	65~73 60~65 20~25	65~73 60~65 20~25
Compression Set	*	%	15~20	12~18
Volume Resistivity	Insulator Conductor Edge insulation part	, cm	1×1014 1.3 8×1013	1×1014 1.3 8×1013
Dielectric Breakdown Voltage	Insulator Edge insulation part	kV/mm	23~27 23~27	23~27 23~27
Insulation Resistance (500V DC)	*	M	1×10³	1×10³
Operating Temperature Range		°C	-25~85	-25~85

* The test is carried out with Shin-Etsu's own method.

Compression Curves

Note