S-type Inter-Connector consists of alternate layers of conductive and insulation silicone rubber. This compression-type connector makes "random connection" possible with high reliability. This type of connector is applicable for the small-sized display used in watch or camera.

Outline Dimensions

Dimensions and Tolerances

Item	Unit	0.05P Type	0.10P Type	0.18P Type	0.25P Type
Pitch (P)	mm	0.05±0.03	0.10±0.04	0.18±0.05	0.25±0.05
Length (L)	mm	1.0~5.0±0.1 70.1~120.0±0.4	5.1~30.0±0.2 120.1~200.0±0.6		30.1~70.0±0.3 200.1~300.0±0.8
Height (H)*	mm	0.8~5.0±0.1		5.1~25.0+0.15/-0.1
Width Without Coat		0.2~5.0±0.08
Width with Coat (W)	mm	0.3~5.1±0.1
Width of Insulation   Coat (Wi)	mm	0.05±0.03

* HW/2
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties

Item	Component	Unit	0.05P Type	0.10P Type, 0.18P Type, 0.25P Type
Specific   Gravity	Insulator Conductor Insulated both sides		1.15 1.15 1.15	1.15 1.25 1.15
Shore   Hardness A	Insulator Conductor Insulated both sides	ISO7619 (TYPE A)	65~73 60~65 65~73	65~73 63~67 65~73
Compression   Set		%	15~20	15~20
Volume   Resistivity	Insulator Conductor Insulated both sides	, cm	1×1014 1.3 1×1014	1×1014 3~6 1×1014
Dielectric   Breakdown   Voltage	Insulator Insulated both sides	kV/mm	23~27 20~23	23~27 20~23
Insulation   Resistance   (500V DC)		M	1×10³	1×10³
Operating   Temperature   Range		°C	-25~85	-25~85

* The test is carried out with Shin-Etsu's own method.

Compression Curves

Note