 |
|
|
Product Info > Electronics Device Business Unit > Connector Division > By Type
|
MAF-type Inter-Connector consists of multiple rows of metal fibers arranged symmetrically in a sheet of silicone rubber. This type is the thinnest of metal connectors. Various shapes are available because of punch-out manufacuturing method applied. MAF-type connectors are used for extensive applications including assembly or inspection device.
|
|
 |
Outline Dimensions
Dimensions and Tolerances
| Item |
Unit |
MAF-type |
|
| Sheet Thickness(T) |
mm |
0.2,0.3,0.4,0.5±0.05 |
|
|
| Diameter of the Metal Fiber |
µm |
30 (in the edge, gold-plated treated, brass) |
|
|
| Length(L) |
mm |
1.0~300.0 |
|
|
| Width(W) |
mm |
1.0~50.0 |
Basic Properties
| Item |
Units |
Values |
|
| Shore Hardness A (T) |
ISO7619(Type A) |
65~73 |
|
|
| Compression Set* |
% |
30~35 |
|
|
| Current Carrying Capacity** |
A/mm² |
1.0 |
|
|
| Contact Resistance** |
 /mm² |
 0.1 |
|
|
| Insulation Resistance (DC 500V)*** |
M |
1×10³ |
|
|
| Dielectric Breakdown Voltage |
kV/mm |
23~27 |
|
|
| Operating Temperature Range |
°C |
-25~85 |
*3000 hrs, test at room temperature.
**by 4-terminal method (current applied 1-10mA), calculated by minimum electrode's area of connection characteristics.
***DC 500 V is charged at the area between minimum electrodes of connection characteristics (as stated in the annexed paper).
Compression Load-Compressibility Curves
Compression Load-Resistance Curves
Sample size: 0.2mm thick MAF-sheet, 0.15mm² gold plated electrode
Sample size: 0.4mm thick MAF-sheet, 0.4mm² gold plated electrode
Note
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector.
| back |
|
|
