JC-type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC-type is coated with an anisotropic conductive adhesive. JC-type is useful for LCD's applications.

Outline Dimensions

Dimensions and Tolerances

Item		Unit	Standard
Size L×H		mm	100×400 max.
Dimension Tolerance	Length (L) Height (H)	mm	±0.25 ±0.25(10H120),±0.5(120<H200),±1.0(200<H400)
Width of Conductor (Tc)		mm	0.25min.
Pitch Tolerance			±0.05(P<1.0) ±0.10(P1.0)
Accumulative Pitch (TP)		mm	±0.1(TP100)
Pitch (P)		mm	0.5
Thickness of Base Film		µm	25
Thickness of Cover Film (option)		µm	12 or 25

* Max. sizes depend on pitch.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Construction

Base Film	Polyimide film
Conductive Lines	Thermosetting resin carbon ink
Adhesive	Thermoplastic synthetic rubber
Condutive Particles	Carbon particles
Insulation Layer*	Printed themoplastic synthetic rubber

* Optional: polyester cover film, polyester stiffner for ZIF type connector.

Basic Properties

Base Film	100/	10~30°C, 30~80%RH
Insulation Resistance	100M	10~30°C, 30~80%RH
Peel Strength (Initial)	2.94N/cm	90° peel, 100 mm/min.
Storage Time	6 months max.	Sealed, 0~40°C,50%RH

Bonding Conditions Range (Reference)

Adhesive Temperature	110°C~130°C
Pressure	2.0±0.5MPa
Time	5±2 seconds(Adhesive temp110°C)

* This temperature should be applied only to the bonding area.
Surfaces should be free of dust and contamination.

Note: