 |
|
|
Product Info > Electronics Device Business Unit > Connector Division > By Type
|
GB-E-type Inter-Connector is a compression type, which consists of gold-plated filaments lined in the conductive part and of insulating silicone rubber on both sides. This type connector makes stable connection possible with lower resistance.
GB-E type could replace soldering and also be used for PCBs, which need current capacity.
|
|
 |
Outline Dimensions
Dimensions and Tolerances
| Item |
Unit |
GB-E type |
|
| Pitch (P) |
mm |
0.05+0.03/-0.01 |
0.1±0.05 |
0.2±0.05 |
|
|
| Length (L) |
mm |
2.0~25.0±0.2
50.1~80.0±0.5
120.1~150.0±1.0
200.1~250.0±1.6 |
25.1~50.0±0.3
80.1~120.0±0.8
150.1~200.0±1.3 |
|
|
| Height (H)* |
mm |
1.0~5.0±0.1 |
5.1~10.0±0.15 |
10.1~20.0±0.2 |
|
|
| Width (W) |
mm |
1.0~2.4±0.1 |
|
2.5~4.0±0.15 |
|
|
| Filament Diameter |
µm |
30 |
40 |
40 |
Special design is available on request.
*HW/2
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.
Basic Properties
| Item |
Unit |
Values |
|
| Contact Resistance |
 |
0.1 |
|
|
| Current Carrying Capacity |
mA |
500 |
|
|
| Insulation Resistance (500V DC) |
M |
1×10³ |
|
|
| Operating Temperature Range |
°C |
-25~85 |
*The test is carried out with Shin-Etsu's own method.
Compression Curves
Sample Size 0.1P×10.0L×2.0H×1.0W
Inner Diameter of Holder:1.0H×1.0W
|
|
Sample Size 0.1P×50.0L×1.0H×1.0W
PCB Used: 2.0P, 1.0mm-width gold-plated electrode
|
Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which bas been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector.
| back |
|
|
