SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance.

Outline Dimensions

Dimensions and Tolerances

Item	Unit	SEC Type
Pitch (P)	mm	0.05±0.03
Length (L)	mm	2.0~20.0±0.15, 150.1~200.0±0.8, 20.1~90.0±0.65%, 200.1~300.0±1.0, 90.1~150.0±0.6
Height (H)*	mm	1.5~5.0±0.1, 5.1~20.0+0.15/-0.1
Width (W)	mm	1.5±0.1, 2.0±0.1, 2.5±0.15 3.0±0.15, 3.5±0.15, 4.0±0.15 4.5±0.15, 5.0±0.15
Width of Conductive   Layer (Z)	mm	0.7±0.05

* HW/2
SS-N type, which has non-sticky sides is available on request.
Shin-Etsu Inter-Connector has been registered in European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.

Basic Properties

Item	Component	Unit	SEC-WHX Type	SEC-NX Type
Shore Hardness A	Insulator Conductor Edge insulation part(1)	ISO7619 (TYPE A)	65~73 60~65 20~25 35~40	65~73 60~65 20~25 35~40
Compression Set	*	%	15~20	15~20
Volume Resistivity	Insulator Conductor Edge insulation part	, cm	1×1014 1.3 1×1011	1×1014 1.0 1×1011
Dielectric Breakdown Voltage	Insulator Edge insulation part	kV/mm	23~27 23~27	23~27 23~27
Insulation Resistance (500V DC)	*	M	1×10³	1×10³
Operating Temperature Range		°C	-25~85	-25~85

(1) The hardness of the support material has alternatives of 20° and 35°.
* The test is carried out with Shin-Etsu's own method.

Compression Curves

Note